MODEL SPECS
Name:
Mini Slash 4X4
Type:
Short course truck
Top Speed:
30+
Skill Level:
1
Scale:
Mini
Length:
16.06 inches (408 mm)
Width:
8.46 inches (215 mm)
Height:
5.63 inches (143 mm)
Weight:
3.62 pounds (1.64 kg)
Track:
7.28 inches (185 mm)
Wheelbase:
9.25 inches (235 mm)
Ground Clearance:
1.06 inches (27 mm)
Driveline:
Shaft-driven 4WD
Transmission:
Direct drive
Differential Type:
Planetary, steel gear
Gear Pitch:
32
Steering Servo:
2056
Radio System:
TQ 2.4 GHz (2-channel)
Battery Compartment Specs:
113 mm L x 41 mm W x 22 mm H
MOTOR SPECS
Name:
BL-2s 3300 Kv
Motor Type:
Sensorless brushless
Weight:
7.51 ounces (213 g)
Length:
3.15 inches (80 mm)
Diameter:
1.42 inches (36 mm)
Shaft Size:
3 mm
Connector Type:
Traxxas Quick Connect Motor Plug
ESC SPECS
Name:
BL-2s Electronic Speed Control
ESC Type:
Brushless
Case Size:
1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm)
Weight:
3.07 ounces (87 g)
BEC Voltage:
6 volts
Thermal Protection:
Two-stage thermal shutdown
Ports:
Auxiliary fan
Battery Connector:
Traxxas High-Current Connector
 
 
30+ mph Top Speed
BL-2s™ Waterproof Electronic Speed Control
Heat sink accepts accessory cooling fan (3340)
Three programmable drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake
Training Mode™ - 50% forward / brake / 50% reverse
Traxxas EZ-Set® one-button setup
Built-in two-stage low-voltage detection
BL-2s™ Brushless Motor
Integrated cooling fan
Low-maintenance design
Efficient ball bearings
3300 Kv
Battery and Charger Included
High-capacity 2-cell LiPo battery
7.4 volts
3500 mAh for extended run time
2-amp USB-C charger
iD® technology for faster, safer charging
TQ™ 2.4 GHz Transmitter
Full-size 2-channel transmitter
All-day comfort with precise long-range control
Clipless Body
Realistic injection-molded interior
Driver figure and replica netting
Integrated cooling channels for ESC and motor
Quick and easy installation and removal
Nerf bar channels for side body support
Reinforced for extra protection against tearing
1/10 Scale 4X4 Driveline
Full-time shaft-driven 4-wheel drive
1/10 scale extreme-duty telescoping driveshafts
Direct drive (no transmission)
Fixed gear mesh system
Large 32-pitch gears
Sealed planetary steel-gear differentials
Fixed gear mesh system
New Extended Mini Chassis
Modular chassis with interlocking front and rear bulkheads
Longer 235 mm wheelbase
Absorbs and distributes impact energy
Easy to service and access components
Driveline is sealed in the chassis to keep out dirt
Easy Battery Access
Battery is protected deep in the chassis
Modular strap with removeable spacer for tall batteries
Battery hold-down pivots for easy access
More secure than conventional retention systems
Steering
1/10 scale 2056 waterproof high-torque servo
Heavy-duty double-shear bellcranks
Cam-operated servo saver
Suspension
Heavy duty, double-shear suspension arms
Dual wishbone design
Extra tough outer suspension components
Oil-Filled Ultra Shocks™
Same construction as 1/10 shocks
Large oil capacity
Easy to tune
Bumpers and Skid Plates
Full-width front bumper
High-angle front skid plate
Rugged interlocking skid plates
Smooth undertray eliminates snags
Integrated nerf bars for side impact resistance
Wheels and Tires
Licensed BFGoodrich® Mud Terrain™ T/A® KM3 tires
Internal ribbed design with no foam inserts
High-traction rubber compound
Replica Maxx Slash wheels
Hex Hardware with Rust-Resistant Black Oxide Coating
Sealed Ball Bearings